The UD1000GM PG5 operates on the Intel ATX12V standard, delivering 1000W of power via single +12V rail, making this ideal for a wide range of gaming focused components. Use only the cables you need with the modular design, saving space within your case. Flat, low-profile cables make wire management and organization easier, allowing you to easily snake wires through any potentially tight areas. High-quality Japanese capacitors balance and drive power to your components while ensuring up to 90% efficiency at typical load, designating this PSU with an 80 PLUS Gold certification.
80 PLUS Gold Certified
Designed to produce up to 90% efficiency at typical loads, the UD1000GM PG5 is 80 PLUS Gold certified, ensuring a typical electrical load is properly managed.
16-Pin PCIe Gen 5.0 Graphics Card Connector
The UD1000GM PG5 has a 16-pin connector and comes with a high-quality native 16-pin cable that allows you to use the PSU with a PCIe Gen 5.0 graphics card. This cable can support up to 600 watts of power to the graphics card.
Thermal Conditioning
Keeping the internals safe during heavy loads is an enlarged heatsink and a 120mm smart hydraulic bearing fan, working together to provide you with a long-lasting system. If the current load is less than 20%, the fan stops, adding to the lifespan of the fan.
Protections
Designed for stability, Gigabyte added protection designs such as OCP, OTP, OVP, OPP, UVP, and SCP, ensuring proper operation of your system.
Compact Design
Gigabyte reduced the length of the power supply so it can be easily installed in any chassis without space constrictions.
Gigabyte GP-UD1000GM PG5 Specs
Connectivity
| Total Connectors |
1 x 16-Pin PCIe (12VHPWR)
1 x 20+4-Pin ATX Motherboard |
| Cable Design | Flat, Modular |
| PCIe Connector Distances | 27.6" / 700 mm 23.6" / 600 mm 5.9" / 150 mm |
| SATA Connector Distances | 23.6" / 600 mm 5.9" / 150 mm 5.9" / 150 mm 5.9" / 150 mm |
| Peripheral Connector Distances | 19.7" / 500 mm 4.7" / 120 mm 4.7" / 120 mm |
| Floppy Connector Distances | 5.9" / 150 mm |
| ATX Connector Distance | 24" / 610 mm |
| EPS Connector Distances | 23.6" / 600 mm 7.9" / 200 mm |
Electrical
| Total Wattage | 1000 W |
| Number of +12 V Rails | 1 |
| Combined Power for +12 V | 1000 W |
| Max Load for +12 V | 83.3 A |
| Combined Power for +3.3/+5 V | 125 W |
| Max Load for +3.3 V | 25 A |
| Max Load for +5 V | 25 A |
| Max Power for +5 Vsb | 15 W |
| Max Load for +5 Vsb | 3 A |
| Max Power for -12 V | 3.6 W |
| Max Load for -12 V | 0.3 A |
| Peak Power | 1000 W |
| AC Input Power | 100 to 240 VAC, 50 / 60 Hz at 6.5 to 15 A |
General
| Efficiency Rating | 80 PLUS Gold |
| Active Power Factor Correction | Yes |
| Efficiency | 90% |
| Hold up Time | 16 ms |
| Power-Good Signal | 100 to 150 ms |
Cooling
| Fan Size | 120 mm |
| Bearing Type | Hydraulic |
Physical
| Form Factor | ATX |
| Compliance | ATX 12 V v3.0 |
| Protection | Over-Current Protection, Over-Power Protection, Over-Temperature Protection, Over-Voltage Protection, Short-Circuit Protection, Under-Voltage Protection |
| Certifications | C-Tick, CCC, CE, cULus, EAC, FCC, IC, RoHS, TUV, UKCA *as per Manufacturer |
| Mean Time Between Failures (MTBF) | 100,000 Hours |
| Dimensions | 5.9 x 3.4 x 5.5" / 150 x 86 x 140 mm |
